Bondshield Electrically Conductive Adhesive

> Structural conductive epoxy adhesives

Back to product list

Download Brochure

Flexible silicone conductive adhesives

The range of flexible conductive adhesives are based mainly on silicone elastomers and are particularly suitable for bonding materials that have differing coefficients of thermal expansion. A typical example of this type of requirement would be the bonding a glass or polycarbonate shielded window into an aluminium bezel or panel aperture. The conductive adhesive secures the window in place but accommodates any movement due to differential thermal expansion/contraction or flexing whilst maintaining a low impedance connection. Our flexible conductive adhesives are also very resistant to vibration, shock and extremes of temperature (thermal shock) whilst providing a high level of environmental sealing.

Flexible conductive silicone adhesives key properties and benefits:

1. Single component – ready to use
2. Room temperature cure
3. Neutral cure – does not evolve corrosive by-products on curing
4. Safe for use with most common substrates – non tarnishing / discolouring
5. Excellent resistance to ageing
6. Wide service temperature range – remains flexible and conductive at extremes of temperature
7. Stable - low bond (joint) resistance through temperature cycling
8. Based on a range of conductive fillers to suit the electrical and environmental requirements of most applications

The main conductive filler types along with their key characteristics are shown below. Please note that this is only an approximate guide in this respect as an adhesive should ideally be matched to a particular application in terms of substrate(s) and service conditions.

1. Silver - high electrical performance and temperature tolerance
2. Silver-plated copper - low bond resistance - Equivalent to CA811
3. Silver-plated nickel - temperature stable
4. Silver-plated aluminium - galvanic compatibility with aluminium alloys
5. Nickel coated graphite –-tolerant of surfaces with comparatively high contact resistance e.g. die-cast zinc alloys and ‘yellow’ or heavy chromate conversion finishes - Equivalent to BS100
6. Carbon - semi-conductive, ideally suited to ESD control

Applications:

1. Vibration and/or shock resistant sealant/adhesive for electronic assemblies
2. Electrical connection/bonding of materials with dissimilar thermal expansion coefficients
3. EMI shielding with environmental sealing (IP68 possible)
4. ESD control/grounding

Bondshield Conductive Adhesive Datasheets

	ECA SS001 conductive adhesive with silver particles
	ECA CS001 conductive adhesive with carbon particles
	ECA NCS001 conductive adhesive with nickel graphite particles *Equivalent to BS100
	ECA SAS001 conductive adhesive with silver-plated aluminium particles
	ECA SCS001 conductive adhesive silver-plated copper particles *Equivalent to CA811